BJM IGF32-9NL, 201154, 0.4HP, 115V, NORYL Chemical Transfer Pump
$1,510.00
0.4 HP, 115 V, 1-phase, 22 ft.
Description
Summary:
Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.
Used in the following U.S. industries:
Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.
- Virtually unbreakable
- Compact and lightweight. Only 13.5 Lbs.
- Never rusts. Excellent resistance against acids, alkalis.
- Two discharge ports. 1 1/4″ inside threaded connection and one 1 1/2″ tapered hose connection delivered with each pump.
- Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.
The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta® Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.
Note: Seal Minder® option not available on the Perfecta® Pump Series pumps.
Details:
MODEL | IGF32-9NL |
---|---|
PART NUMBER | 201154 |
METAL FITTED | 316SS |
LIP SEAL: LOWER | Fluoroelastomer |
LIP SEAL: UPPER | Fluoroelastomer |
LEVEL SWITCH | No |
MAX. FLOW: GPM | 46 |
---|---|
MAX. HEAD: ft | 27′ |
PUMP TYPE | Top or Side Discharge, Chemical Resistant |
STRAINER OPENING | 0.25″ |
DISCHARGE SIZE | 1-1/4″ NPT-F and 1-1/2″ Tapered Hose |
MAX. SUBMERGED DEPTH | 33′ |
MIN. SUBMERGED DEPTH | 3.5″ |
SHIPPING WEIGHT:lbs | 17 |
IMPELLER – MULTI VANE | Noryl GTX830 |
---|---|
ROTOR SHAFT | 316 SS |
EXTERNAL HARDWARE | 316 SS |
PUMPTOPCOVER | Ultramid B3 WG7 |
PUMP HANDLE | Polypropylene |
MOTOR RATING: HP | 0.4 |
---|---|
MOTOR RPM | 3450 |
MOTOR INSULATION CLASS | F |
MOTOR SERVICE FACTOR | 1.1 |
VOLTAGE | 115, 1PH-60Hz |
CURRENT F.L.A. | 5 |
MOTOR PROTECTION | Thermal Breaker, 150° C |
POWER CORD: GAGE; LENGTH | A.W.G. 16/3; 22′, SJOOW |
MAXIMUM LIQUID TEMPERATURE | 135° F – Continuous duty 195°F – Intermittent use submerge less than 20 minutes |
Seal Minder® | Not Available |
Additional information
Weight | 17 lbs |
---|