Goulds PE51M, 1/2HP, 115V, Manual Submersible Effluent Pump
$452.75
Description
Features and Benefits:
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, 20′ standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
- Complete unit is heavy dury, portable and compact
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
On-site wastewater treatment:
- Mound Systems
- Effluent/Dosing Systems
- Low Pressure Pipe Systems
- Basement Draining
- Heavy Duty Sump/Dewatering
| Brand | Goulds |
| Mfg. Number | PE51M |
| Model Number | PE51 |
| Series | PE |
| Product Type | Submersible effluent pump |
| Application | Wastewater treatment |
| Horsepower | 1/2 HP |
| Voltage | 115 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 3400 rpm |
| Operation | Manual |
| Float Switch Style | No Switch |
| Pump Body | Cast iron |
| Impeller Material | Thermoplastic |
| Discharge Size | 1-1/2″ NPT |
| Maximum Flow | 70 gpm |
| Maximum Head | 37 ft |
| Flow at 5 ft | N/A |
| Flow at 10 ft | 67 gpm |
| Flow at 15 ft | 59 gpm |
| Flow at 20 ft | 50 gpm |
| Flow at 25 ft | 39 gpm |
| Flow at 30 ft | 26 gpm |
| Flow at 35 ft | 8 gpm |
| Maximum Solids Handling | 1/2″ |
| Minimum Basin Diameter | 18″ |
| Motor Design | PSC (Permanent Split Capacitor) |
| Motor Insulation | Class B |
| Thermal Protection | Yes |
| Current | 9.5 Amps |
| Minimum Circuit Breaker | 20 |
| Maximum Temperature | 104°F |
| Cord Length | 20 ft |
For a part pictorial and replacement parts list, Goulds Model PE pic and list.
Additional information
| Weight | 31 lbs |
|---|