BJM SV08C, 201536, 1HP, 460V, Cast Iron, Vortex Trash Pump
$1,490.00
3450 RPM, 1 HP, 460 V, 3-phase
Description
Summary:
The SV-pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.
- Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
- 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
- Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
Tough Pump Construction – Cast iron construction stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Details:
MAX. FLOW: GPM | 100 |
---|---|
MAX. HEAD: ft | 30″ |
PUMP TYPE | Non Clog Vortex |
DISCHARGE SIZE | 3″ NPT-M (2″ NPT-M optional) |
MAX. SUBMERGED DEPTH | 65′ |
MIN. SUBMERGED DEPTH | 11″ |
SHIPPING WEIGHT:lbs | 74 |
MOTOR CASING | 304SS |
---|---|
PUMP VOLUTE | Cast Iron |
LIP SEALS & O-RINGS | Buna – N |
ROTOR SHAFT | 304 SS |
EXTERNAL HARDWARE | 304 SS |
QTY. OIL IN SEAL CHAMBER | 9.3 U.S. FL. OZ. |
MOTOR RATING: HP | 1 |
---|---|
MOTOR RPM | 3450 |
MOTOR INSULATION CLASS | F |
MOTOR SERVICE FACTOR | 1.1 |
VOLTAGE | 460, 3ph-60 Hz |
CURRENT F.L.A. | 1.6 |
MOTOR PROTECTION | Thermal & Amp Overload |
POWER CORD: GAGE; LENGTH | A.W.G. 16/4, 33′, STOW |
MAXIMUM LIQUID TEMPERATURE | 104° F |
Seal Minder® | Optional |
Additional information
Weight | 74 lbs |
---|