BJM JX220CSS, 205137-R, 30HP, 460V, 3 Phase Sump Pump

Call for Price

30 HP, 460 V, 3-phase

SKU: 205137-R Category: Tag:

Description

Summary:

Side discharge submersibles are typically used in sump applications where the liquid level can be controlled and where the pumps are partially submerged when in operation. The JX models are designed for general pumping purposes where the passing or shredding of larger solids is not required.

JX pumps are available in size 0.5 to 10 HP. Single-phase versions are from 0.5 to 2 HP 50 Hz models can be ordered at the same low price as 60Hz. Dual mechanical seals with the lower seal made of highly wear resistant Sic/Sic, for less downtime and long life.

All “wet parts” are of highest quality 316 stainless steel. Wear parts are made of Cast material. The 0.5 to 5 H.P. JX pumps are made with PrecisionCast Parts (also referred to as Investment Castings), the same quality that is used in aircraft and space vehicles due to it’s superior density and strength. Other models are manufactured with sand cast parts.

Elastomers such as gaskets and o-rings are made of FKM.

Standard power cable is made of oil resistant quality, which works very well in most environments. EPDM quality cable and elastomers as well as BUNA elastomers are available on special order.

  • All metal parts exposed to pumped liquids are made of 316 Stainless Steel.
  • Elastomers are made of FKM.
  • Longer Power Cord – Standard 33ft. power cord.
  • Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • JX55SS and JX75SS MODELS – The 7.5 and 10 HP models are designed with an outer sleeve on the impeller shaft. Two oil seal rings, upper and lower, rides on this replaceable shaft which prevents the formation of grooves on the impeller shaft itself.
  • TWO PUMPS IN ONE – Most sizes can be converted to a high head version by merely changing the impeller and the suction plate. Other brands often require major changes to achieve different heads or volumes.
  • SLIDE RAIL SYSTEMS
    The JX55SS and JX75SS models can also be mounted on BJM slide rail systems.

Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.

Details:

GENERAL DATA
MAX. FLOW: GPM 760
MAX. HEAD: ft 186′
PUMP TYPE Sump, Side Discharge
STRAINER OPENING 1.0″ Dia.
DISCHARGE SIZE 6″ ANSI Slip Weld Flange
MAX. SUBMERGED DEPTH 65′
MIN. SUBMERGED DEPTH 10.8″
SHIPPING WEIGHT:lbs 500

 

CONSTRUCTION/MATERIAL DATA
MOTOR CASING 316SS
PUMP VOLUTE 316SS
IMPELLER – MULTI VANE 316SS
LIP SEALS & O-RINGS FKM
ROTOR SHAFT 316SS
EXTERNAL HARDWARE 316SS
QTY. OIL IN SEAL CHAMBER 45.6 U.S. FL. OZ.
QTY. OIL IN MOTOR STATOR None

 

ELECTRICAL/MOTOR DATA
MOTOR RATING: HP 30
MOTOR RPM 3450
MOTOR INSULATION CLASS H
MOTOR SERVICE FACTOR 1.1
VOLTAGE 460, 3ph-60Hz
CURRENT F.L.A. 32
MOTOR PROTECTION Thermal & Amp Overload
POWER CORD: GAGE; LENGTH A.W.G. 4/4; 50′, SOOW
MAXIMUM LIQUID TEMPERATURE 104° F
Seal Minder® Optional

Additional information

Weight 500 lbs