BJM KB110H, Part #201285, 15HP, 460V, Heavy Duty Dewatering/High Head Agitator Pump
$13,320.00
15 HP, 460 V
Description
Summary:
KB Series Submersible pumps feature…
- Abrasive resistant chrome iron components;
- Agitator – to fluidize settled solids into suspension.
- Wear plate – replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
- Semi- open Impeller – to handle some solids.
- EVERY KB pump model is protected by;
- Class H motor insulation – and built in amperage ( FLA ) and temperature overload protection.
- Double mechanical seals – SiC/SiC lower & Carbon Ceramic upper in a separate oil filled seal chamber.
- Heavy Duty Lip Seal – additional protection for the mechanical seals.
- Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
- The KB Series are top discharge pumps;
- KB pumps are utility pumps – frequently dragged from one site to another. The KB doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
- Top discharge pumps are cooled by pumped liquid – The KB pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
- Top discharge means “SLIM” – even the largest model with a 13.5 inch “waistline” will fit down a manhole with a hose attached. High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.
Details:
MAX. FLOW: GPM | 356 |
---|---|
MAX. HEAD: ft | 170′ |
PUMP TYPE | Top Discharge, Dewatering |
DISCHARGE SIZE | 4″ NPT-M |
MAX. SUBMERGED DEPTH | 65′ |
SHIPPING WEIGHT:lbs | 427 |
MOTOR CASING | Cast Iron |
---|---|
PUMP VOLUTE | Ductile Iron |
IMPELLER – MULTI VANE | Hi-Chrome |
LIP SEALS & O-RINGS | Buna – N |
ROTOR SHAFT | 304 SS |
EXTERNAL HARDWARE | 304 SS |
QTY. OIL IN SEAL CHAMBER | 49 U.S. FL. OZ. |
MOTOR RATING: HP | 15 |
---|---|
MOTOR RPM | 3450 |
MOTOR INSULATION CLASS | H |
MOTOR SERVICE FACTOR | 1.1 |
VOLTAGE | 460, 3ph-60Hz |
CURRENT F.L.A. | 18.7 |
MOTOR PROTECTION | Thermal & Amp Overload |
POWER CORD: GAGE; LENGTH | A.W.G 8/5; 50′, SOOW |
MAXIMUM LIQUID TEMPERATURE | 104° F |
Seal Minder® | Optional |
Additional information
Weight | 427 lbs |
---|