BJM KZN220L, Part #201339, 30HP, 460V, Heavy Duty Slurry Pump

Description

Summary:

1. EVERY KZN slurry pump is constructed with the following abrasive resistant 28% chrome iron (600 Brinell, 57 Rockwell C) components;
   • Agitator – to fluidize settled solids into a slurry.
   • Wear plate – replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
   • Semi- open Impeller – to handle abrasive solid concentrations as high as 70% by weight.
2. EVERY KZN slurry pump model is protected by;
   • Class H motor insulation – and built in amperage ( FLA ) and temperature overload protection.
   • Double silicon carbide mechanical seals – in a separate oil filled seal chamber.
   • Heavy Duty Lip Seal – additional protection for the mechanical seals. Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
   • Pump volutes cast from hardened Ductile Iron – 300 Brinnell hardness; twice as abrasive resistant as standard ductile iron.
3. EVERY KZN is a top discharge pump;
   • KZN heavy duty slurry pumps are utility pumps; frequently dragged from one site to another. The KZN doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
   • Top discharge pumps are cooled by pumped liquid – The KZN slurry pumps can pump a sump or pit down to within “inches” of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
   • Top discharge means “SLIM” – even the largest model with a 22.75 inch “waistline” will fit down a manhole with a hose attached.
   • The KZN’s hardened ductile iron volutes – cast with extra thick walls at the point where pumped slurry enters the discharge.

High-Chrome Agitator helps keep solids suspended in liquid and helps prevent pump from clogging.

Details: