BJM SV15C, 201539, 2HP, 208V, Cast Iron, Vortex Trash Pump
$3,280.00
3450 RPM, 2 HP, 208 V, 3-phase
Description
Summary:
The SV-pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.
- Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
- 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
- Three Seal Motor Protection – Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
- More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
Tough Pump Construction – Cast iron construction stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
Details:
MAX. FLOW: GPM | 171 |
---|---|
MAX. HEAD: ft | 29′ |
PUMP TYPE | Non Clog Vortex |
DISCHARGE SIZE | 3″ NPT-F |
MAX. SUBMERGED DEPTH | 65′ |
MIN. SUBMERGED DEPTH | 13.5″ |
SHIPPING WEIGHT:lbs | 96 |
MOTOR CASING | 304SS |
---|---|
PUMP VOLUTE | Cast Iron |
LIP SEALS & O-RINGS | Buna – N |
ROTOR SHAFT | 304 SS |
EXTERNAL HARDWARE | 304 SS |
QTY. OIL IN SEAL CHAMBER | 9.3 U.S. FL. OZ. |
QTY. OIL IN MOTOR STATOR | No oil in motor stator (After ser# 43945) 13.5 U.S. FL. OZ. (Before ser#43945) |
MOTOR RATING: HP | 2 |
---|---|
MOTOR RPM | 3450 |
MOTOR INSULATION CLASS | F |
MOTOR SERVICE FACTOR | 1.1 |
VOLTAGE | 208, 3ph-60 Hz |
CURRENT F.L.A. | 6.3 |
MOTOR PROTECTION | Thermal & Amp Overload |
POWER CORD: GAGE; LENGTH | A.W.G. 16/4; 33′, STOW |
MAXIMUM LIQUID TEMPERATURE | 104° F |
Seal Minder® | Optional |
Additional information
Weight | 96 lbs |
---|