Goulds 2WD51E4AFBH – 2WD Series Non-Clog Sewage Pump
$3,158.43
up to 183 GPM, Cast Iron, 3500 RPM, 1 HP, 460V, 3-phase, 60 Hz, Pilot Duty Thermal Sensors, Si-Bronze Impeller, 3.75 in., SiC/SiC/BUNA (lower), 50 ft.
Description
Goulds 2WD Submersible 2″ Non-Clog Sewage Pump Dual Seal with Seal Sensor Probe
This pump is designed for effluent, sewage or wastewater application and is capable of handling sewage containing non-abrasive 2 inch maximum solids.
| Series | 2WD Non-Clog Sewage Pumps |
| Manufacturer Part Number | 2WD51E4AFBH |
| UPC | 69766654513 |
| Capacity | up to 183 GPM |
| Material | Cast Iron |
| Shaft Seal Material | SiC/SiC/BUNA (lower) |
| Speed | 3500 RPM |
| HP Rating | 1 HP |
| Hz | 60 Hz |
| Phase | 3 |
| Voltage | 460V |
| Impeller Material | Si-Bronze Impeller |
| Impeller Diameter/Specs | 3.75 in. |
| Discharge NPT | 2 in. NPT |
| Cord Length (Power and Sensor) | 50 ft. |
| Sensor Option | Pilot Duty Thermal Sensors |
| Casing Paint Option | None |
Features
- Cast iron, semi-open or enclosed, non-clog impeller; dynamically balanced with pump out vanes for mechanical seal protection
- Cast iron, flanged volute type casing for maximum efficiency. Designed for easy installation on A10-20 guide rail
- Dual mechanical seals
- Lower: Silicon-Carbide vs. Silicon-Carbide sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers
- Upper: Carbon vs. Ceramic sealing faces, stainless steel metal parts, BUNA-N elastomers
- Seal sensor probe located in oil-filled chamber. If pumpage should begin to leak past lower seal, it indicates to pump control panel a fault has occurred. Requires optional seal fail circuit in the control panel
- Corrosion resistant, 400 stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
- 300 series stainless steel fasteners
- Capable of running dry without damage to components
- Designed for continuous operation when fully submerged
- Provided with with a 2 bolt companion flange with 2 inch NPT, vertical discharge
- Capacitor start motors for maximum starting torque.
Applications
- Sewage systems
- Dewatering/effluent
- Water transfer
- Light industrial
- Commercial applications
Additional information
| Weight | 115 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.