Hydromatic 528340067 – Model HVS200M3-2-35 Standard Flow Submersible Grinder Pump
$3,036.96
31 GPM, Cast Iron, 3450 RPM, 2 HP, 230V, 3-phase, 60 Hz, Semi-Open 8-Vane, Type 21 – Nitrile, 35 ft.
Description
Pentair Hydromatic HV200 Series Grinder Pumps
The Hydromatic HV200 Series grinder is engineered from the ground up in order to overcome the increased debris and higher pressure required in today’s wastewater environment. It features a patented axial cutter design and semi-open impeller to effectively macerate challenging sewage solids into a fine slurry.
Key Features
- Patented axial cutter technology
- Advanced hydraulics
- Legendary seal leak detection
Additional Features:
- Cable Entry System
- Oil-Filled Motor
- Heat Sensor
- Heavy 416 SST Shaft
- Double Mechanical Shaft Seals
- Seal Leak Probe
- SST Semi-Open Impeller
- Axial Cutter System
- Lower Double Row Ball Bearings
- Volute Case
Specifications
- Capacities To: 31 gpm / 117.3 lpm
- Heads To: 185 ft / 56.38 m
- Liquids Handling: Domestic raw sewage
- Intermittent Liquid Temp.: Up to 140 F / Up to 60 C
- Winding Insulation Temp (Class F): 311 F / 155 C
- Std. Third Party Approvals: CSA
- Acceptable pH Range: 6-9
- Specific Gravity: .9 – 1.1
- Viscosity: 28 – 35 SSU
- Discharge (Flange Dia.): 1 1/4 in / 31.75 mm
- Minimum Sump Diameter: Domestic raw sewage
- Simplex: 24 in / 61.0 cm
- Duplex: 36 in / 91.4 cm
Additional information
| Weight | 104 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.