Myers PQP20, 2 HP, 115/230 Volts, PQP Series Centrifugal/Sprinkler Pump
$1,498.50
Description
Summary:
Quick priming PQP Series Pump feature lightweight construction in a self-priming design. These models offer a stronger pump body with reinforcement ribs and also a new 2″ suction that is designed for the professional pump contractor.
Key Features:
- Fiberglass-reinforced polypropylene pump body and seal plate is lightweight, corrosion-resistant and exceptionally strong
- Drain port provided for easy winterizing
- Corrosion-resistant composite pump base
- Easy serviceable back pullout design
- 2-compartment, square flange motor with thermal overload protection
- Rapid priming once pump body is filled with water
Details:
| Item # | PQP Series |
| Body Construction | Fiberglass-reinforced thermoplastic |
| Horsepower | 2 |
| Maximum Capacity | 90 GPM (model PQP25) |
| Flow at 10-Foot Lift and 30 PSI | 44 GPM (model PQP15) |
| Max Lift | 25′ |
| Maximum Discharge Pressure | 60 PSI (model PQP25) |
| Maximum Total Pressure Inlet + Pump Pressure | PQP10: 105 PSI/ PQP15: 110 PSI / PQP20 : 120 PSI /PQP25: 140 PSI |
| Suction Size | 1 & 1-1/2 HP: 1-1/2″ NPT 2 & 2-1/2 HP: 2″ NPT |
| Discharge Size | 1 & 1-1/2 HP: 1-1/2″NPT 2 & 2-1/2 HP: 2″ NPT |
| Amp Draw Full Load | Model & Voltage Dependent |
| Voltage | Switchable 230v/115v on 1 & 1-1/2 HP models, 230v on 2 HP |
| Maximum Water Temperature | 140 F (60 C) |
| Base | High-impact composite, ABS |
| Seal Plate | Fiberglass-reinforced, Polypropylene |
| Impeller | Polycarbonate |
| Diffuser | Polycarbonate |
| Shaft | Stainless Steel |
| Clamp | Stainless Steel |
For more information, please view the following:
Additional information
| Weight | 42 lbs |
|---|