Description
Specifications:
- Superior performance at depths to water of 70′ or less
- Rugged cast iron constructionReady-to-install, heavy-duty, dual-voltage 1/2HP motorĀ preset atĀ 115 volts
- Self-priming after pump housing is initially filled, check valve or foot valve required
- Pre-wired pressure switch preset for 30-50 PSI operationEjector Kit included
Body Construction | Cast Iron |
Horsepower | 1/2 HP |
Maximum Capacity | 10 GPM (in shallow well setup) |
Flow at 10′ Lift and 40 PSI | 9 GPM (in shallow well setup) |
Max Lift | 70′ |
Maximum Inlet Pressure | 70 PSI (in shallow well setup) |
Pressure Switch Setting | 30/50 |
Suction Size | 1-1/4″ NPT |
Drive Size | 1″ NPT |
Discharge Size | 1″ NPT |
Amp Draw (full load) | 7 amps on 115v / 3.5 amps on 230v |
Voltage | 115v / 230v AC, 60 Hz (factory preset to 115v) |
Recommended Breaker | 15 amp |
Additional information
Weight | 38 lbs |
---|