Description
Specifications:
- Superior performance at depths to water of 70′ or less
- Rugged cast iron construction
- Ready-to-install, heavy-duty, dual-voltage 3/4 HP motor preset at 230 volts
- Self-priming after pump housing is initially filled, check valve or foot valve required
- Pre-wired pressure switch preset for 30-50 PSI operation
- Ejector Kit included
Body Construction | Cast Iron |
Horsepower | 3/4 HP |
Maximum Capacity | 16 GPM (shallow well setup) |
Flow at 10′ Lift and 40 PSI | 13-1/2 GPM (shallow well setup) |
Max Lift | 70′ |
Max Shut-Off Pressure | 70 PSI (shallow well setup) |
Maximum Inlet Pressure | |
Pressure Switch Setting | 30/50 |
Suction Size | 1-1/4″ NPT |
Drive Size | 1″ NPT |
Discharge Size | 1″ NPT |
Amp Draw (full load) | 5.5 amps on 230v / 11 amps on 115v |
Voltage | 230v / 115v AC, 60 Hz (factory preset to 230v) |
Recommended Breaker | 15 amp on 230v / 20 amp on 115v |
Additional information
Weight | 51.75 lbs |
---|