Simer 3410P, 1 HP Thermoplastic Sprinkler System Pump
$508.35
Description
Specifications:
With a combination of good flow and good pressure, these pumps are perfect for your in-ground sprinkler system.
- Superior performance at depths to water of 20′ or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
| Body Construction | Thermoplastic |
| Horsepower | 1 HP |
| Maximum Capacity | 55 GPM |
| Flow at 10′ Lift and 40 PSI | 28 GPM |
| Max Lift | 25′ |
| Max Discharge Pressure | 46 PSI |
| Maximum Total Pressure (Inlet + Pump Pressure) | 55 PSI |
| Suction Size | 1 ½” NPT (female) |
| Discharge Size | 1 ½” NPT (female) |
| Amp Draw (full load) | 7.4 amps on 230v / 14.8 amps on 115v |
| Voltage | 230V / 115V AC, 60 Hz |
| Maximum Water Temperature | 140°F (60°C) |
Additional information
| Weight | 29 lbs |
|---|